PRODUCTS

REFLECTIVE COATINGS

#720 ARC ElastaHyde

#720 ARC ElastaHyde – 720 ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR SystemMeets CA Title-24Specially Formulated For Coating Existing SPF RoofsLess Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this product meets the ENERGY STAR® guidelines for energy

#790 AFC ElastaHyde

#790 ARC ElastaHyde – 790 ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Formulated For Use Over EPDM SurfaceRecommended For Use In Cold Regions – Excellent For Use On New Uncoated SPF Systems When cured #790 AFC ElastaHyde forms an extremely tough, flexible film that can withstand the most rigorous weather conditions. #790 AFC ElastaHyde is designed as a surface coating for EPDM Membranes, Sprayed Polyurethane Foam, Western Colloid “Fluid Applied Reinforced Roofing” membranes

ElastaHyde – QS QUICK SET

ElastaHyde QS – QuickSet ElastaHyde QS – Quick Set Formulation ElastaHyde 720 and 790 are available in a “Quick Set” formulation. This special formulation aids in the application of ElastaHyde when damp, wet or rainy weather is expected before the ElastaHyde has proper time to completely dry. ElastaHyde QS will set up rapidly, within 15-20 minutes, and resist moisture in the form of dew, fog or even heavy rain. Once set up it will not

#700 EC Western White

#700 EC ElastaHyde – 700 ACRYLIC ELASTOMERIC REFLECTIVE COATING#700 EC WesternWhite is an acrylic, elastomeric coating designed to be used when cost is a factor.Economy Grade – Water Based – Ideal For Prolonging Roof Life For use as a surface coating on a Western Colloid “Fluid Applied Reinforced Roofing” systems use #720 ARC ElastaHyde, #790 AFC ElastaHyde or contact a Western Colloid representative. It is used to protect roof membranes from the harmful rays of

#770 AXP ElastaHyde

#770 ARC ElastaHyde – 770 ACRYLIC ELASTOMERIC BASE COATINGWater Based – Formulated For Resistance To Ponding WaterCures Faster than Most Acrylic Coatings – Excellent As A Base Coat Over Smooth Asphaltic Surfaces #770 AXP ElastaHyde reflects over 83% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments but is not recommended as the finish coating. It is recommended that #720 ARC or #790 AFC ElastaHyde be used as the

#525 SilverWhite

#525 SilverWhite – 525 ALUMINUM REFLECTIVE ROOF COATINGWater Based – Prevents Premature Aging – Reduces Building Temperatures Western Colloid’s #525 SilverWhite is a durable, specially-formulated water based aluminum asphaltic emulsion which has been developed to resist rigorous weather conditions while protecting roof surfaces and can contribute to energy savings. #525 SilverWhite has excellent elongation and tensile strength. When properly applied #525 SilverWhite reflects up to 76% of the sun’s rays. This prevents premature aging and

#8000 All Weather Elastic Cement

#8000 All Weather Elastic Cement – 8000 ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR System – Meets CA Title-24Specially Formulated For Coating Existing SPF Roofs – Less Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this product meets

#800 Elastic Cement

#800 Elastic Cement – 800 ELASTOMERIC FLASHING, PATCHING AND SEALING COMPOUNDWater Based – Superior Adhesion and Elongation – Permanent Sealing Compound When cured, #800 Elastic Cement forms a tough, flexible, elastic membrane that can withstand greater stress than ordinary plastic roof cement, flashing compound or even modified plastic cement. #800 Elastic Cement is a heavy bodied compound that can be brushed or troweled (brush application is recommended). When making repairs to splits, seams or flashings

#298E Elastomeric Asphalt Emulsion

#298E Elastomeric Asphalt Emulsion – 298E ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR System – Meets CA Title-24Specially Formulated For Coating Existing SPF Roofs – Less Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this product meets the

#298 Asphalt Emulsion

#298 Asphalt Emulsion – 298 ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR System – Meets CA Title-24Specially Formulated For Coating Existing SPF Roofs – Less Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this product meets the ENERGY

#298X – Asphalt Emusion – Fill & Slope Compound

#298X Asphalt Emulsion – Pond Filler & Sloping Compound ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR System – Meets CA Title-24Specially Formulated For Coating Existing SPF Roofs – Less Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this

#9000 Roof Wash & Prime

#9000 Roof Wash & Prime – 9000 SPECIALLY FORMULATED ROOF DETERGENTRemoves Oxidation, Dirt, Grease And ContaminantsApply On All Types Of Roof Surfaces – Ideal For Use On EPDM Western Colloid’s #9000 Roof Wash & Prime is a low viscosity detergent intended for application to all types of roof surfaces prior to power washing. #9000 lifts dirt and grease from the surface of the roof. #9000 is formulated from surfactants and alkaline cleaning agents. #9000 also

#930 TPO Primer

#930 TPO Primer – 930 PREMIUM PRIMER for ADHESION to TPO MEMBRANEEnhances adhesion of acrylic coatings to aged TPOEliminates Need For Base Coat – Water Based and Clear. #930 TPO Primer is a water based, clear, acrylic primer. It is formulated with a unique, premium acrylic resin that is designed to enhance the adhesion of acrylic coatings to aged TPO single ply membranes. #930 TPO Primer eliminates the need of a special base coat that

#970 A2A Bonding Primer

#970 A2A Bonding Primer – 970 ACRYLIC TO ASPHALT ACRYLIC BONDING PRIMERWater Based – Formulated For Smooth Asphalt SurfacesIdeal For Use In Ponding Conditions Western Colloid’s #970 A2A Bonding Primer (Acrylic to Asphalt) is a water based, clear acrylic primer. It is formulated with premium acrylic resins that are designed to improve the adhesion of acrylic coatings to smooth asphalt products. #970 A2A Bonding Primer is designed to be used as a primer coat when

#950 Primer / Sealer – Stain Blocker

#950 Primer / Sealer – Stain Blocker – 950 ACRYLIC EMULSION PRIMERWater Based – Adheres To Difficult Surfaces – Good Corrosion Resistance Western Colloid’s #900 MTL+ Bonding/Divorcing Primer is a very versatile water-based acrylic emulsion primer. This primer not only adheres to difficult metallic substrates including Kynar, but also gives good corrosion resistance over carbon steel. #900’s creative formulation makes it a very versatile water-based primer. This primer also has excellent adhesion over most single

#900R MTL + Rust Primer

#900R MTL +Rust Primer – 900 R ACRYLIC PREMIUM GRADE ELASTOMERIC REFLECTIVE COATINGWater Based – Ideal As Top Coat For a FARR System – Meets CA Title-24Specially Formulated For Coating Existing SPF Roofs – Less Bleed Thru Over Asphaltic Surfaces #720 ARC ElastaHyde (white) reflects over 84% of Sun’s rays and serves as a thermal reflector due to hiding & reflective pigments. As an ENERGY STAR® Partner, Western Colloid has determined that this product meets

#900 MTL + Bonding / Divorcing Primer

#900 MTL + Bonding/Divorcing Primer – 900 ACRYLIC EMULSION PRIMERWater Based – Adheres To Difficult Surfaces – Good Corrosion Resistance Western Colloid’s #900 MTL+ Bonding/Divorcing Primer is a very versatile water-based acrylic emulsion primer. This primer not only adheres to difficult metallic substrates including Kynar, but also gives good corrosion resistance over carbon steel. #900’s creative formulation makes it a very versatile water-based primer. This primer also has excellent adhesion over most single ply membranes,

#901 Clear Rock Binder

#901 Clear Rock Binder – 901 CLEAR VINYL ACRYLIC COATINGWater Based – Secures Loose GravelGreat For Sealing Plaster And Masonry Surfaces Western Colloid’s #901 Clear Rock Binder is a water based, clear, vinyl acrylic coating. It is formulated with tough acrylic resins, to form a long lasting clear binder on gravel roofs or anywhere loose gravel is present. When applied properly it will secure loose gravel, preventing bare spots, membrane burnouts and loose gravel in

#925 Clear Skylight Coating

#925 Clear Skylight Coating – 925 CLEAR ACRYLIC COATING FOR USE ON FIBERGLASS SKYLIGHTSWater Based – Reconditions Fiberglass SkylightsClear Sealer For Wood And Masonry – Forms Hard Long Lasting Surface Western Colloid’s #925 Clear Skylight Coating is a water based, clear, acrylic coating. It is formulated with premium acrylic resin, to form a hard, long lasting, clear surface on aged and worn fiberglass skylights. When applied properly it will give worn fiberglass skylights additional years

#850 SWS Seamless Walkway Coating

#850 SWS Seamless Walkway Coating – 850 ACRYLIC SEAMLESS WALKWAY SYSTEMWater Based Protects Roof From Damage Due To Foot TrafficLong Lasting – Provides Safer Walking Surface Western Colloid’s #850 SWS Seamless Walkway System is a unique, water based acrylic roof coating designed to protect walking areas and paths on smooth roofing systems. #850 SWS can be used on coated and fluid applied roof systems as well as approved single ply, modified bitumen and BUR roofing,

WCP-HS – Heavy Soft

WCP-HS – Heavy Soft Heavy Soft: 3oz. Heavy-weight Stitchbonded Polyester Fabric with a medium soft finish. WCP-HS has excellent strength and elongation. WCP-HS has good conformability on smooth or semi-smooth surfaces. This product works well when used over cap sheet, smooth and spudded or filled gravel roofs. WCP-HS has more and closer stitches which may require increased brooming to insure proper embedment and removal of all air pockets. WCP-HS also comes in cut width rolls

WCP-SF (W-26) – Standard Firm

WCP-SF (W-26) – Standard Firm Standard Firm: 2.75-3oz. Standard-weight Stitchbonded Polyester Fabric with a firm finish. WCP-SF has good strength and elongation. WCP-SF has good conformability on smooth or semi-smooth surfaces. WCP-SF works well when used over smooth or cap sheet surfaces. It has fewer stitches per inch which allows for better wetability which requires less brooming. Because it has a firm (starched) finish it will have fewer wrinkles and will lay straighter during application.

WCP-SS – Standard Soft

WCP-SS – Standard Soft Standard Soft: 2.75-3oz. Standard-weight Stitchbonded Polyester Fabric with a soft finish. WCP-SS has good strength and elongation. WCP-SS has excellent conformability especially on rough surfaces. WCP-SS works well when used over vacuumed, spudded or filled gravel surfaces. It has fewer stitches per inch which allows for better wetability which requires less brooming. Data Sheets: WCP-SS 325 Tech Bulletin Polyester Fabric Safety Data Sheet Availability: 10 squares (1080 sq.ft.) = 40″ x